Full Specs   Engine    Model    Komatsu SAA4D102E-2  Type    Water-cooled, 4-cycle, emissionized  Aspiration    Turbocharged and air-cooled aftercooler  Number of cylinders    4  Bore  4.02''  102 mm  Stroke  4.72''  120 mm  Piston displacement  240 in³  3.9 ltr  Gross horsepower @ 2200 rpm  99 HP  74 kW  Net Flywheel horsepower*:      SAE J1349 @ 2200 rpm  95 HP  71 kW  DIN 6270 @ 2200 rpm  96 PS  71 kW  Net maximum torque @ 1300 rpm  318 lb•ft  431 N•m / 44 kg•m  Governor    All-speed, mechanical  Filter    Full-flow  Notes:  Direct injection fuel system.  Forced lubrication driven by gear pump. Full-flow for lube purification. Dry-type air cleaner with automatic dust evacuator and dust indicator. 24 V / 5.5 kW electrical starter motor. 24 V / 35 A alternator. 2 x 12 V / 60 Ah batteries.  **Net flywheel horsepower:    Net flywheel horsepower output for standard engine (SAE J1349) including air cleaner, alternator (not charging), water pump, lubricating oil pump, fuel pump, muffler, and fan.    Komstat Hydrostatic Transmission    Dual-path, hydrostatic transmission provides infinite speed change up to 5.3 mph/8.5 km/h. The 3-speed variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Gearshift lock lever and neutral safety switch prevent machine from starting accidently.  Travel speed  Forward  Reverse  1st gear  2.7 mph 4.3 km/h  2.7 mph 4.3 km/h  2nd gear  4.0 mph 6.5 km/h  4.0 mph 6.5 km/h  3rd gear  5.3 mph 8.5 km/h  5.3 mph 8.5 km/h  Maximum drawbar pull:  30,430 lb  135 kN 13,800 kgf    Steering System    Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left to make a left turn. Tilt it to the right for a right turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic steering eliminates steering clutches and brakes, providing smooth powerful turns. A PPC valve integrated into the steering circuit facilitates smooth, shockless control. The PCCS utilizes shift buttons to increase and decrease speed.  Minimum turning radius  8'7"  2.61 m  (As measured by track marks on the ground).        Final Drive    Two-stage planetary gear integrated into axial piston travel motors. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprockets for easy replacement.    Undercarriage    Suspension    Rigid type  Track roller frame    Box section, high-tensile-strength steel structure  Rollers and idlers    Lubricated idlers/carrier rollers track rollers are sealed with floating seals  Double flange rollers    3 per side  Lubricated tracks:      Unique dust seals for preventing entry of foreign abrasive into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.      Number of carrier rollers    1 (each side)  Number of track rollers    6 (each side)  Number of shoes    39 (each side)  Grouser height  2.1''  53 mm  Shoe width (standard)  18.1''  460 mm  Ground contact area  3,365 in²  21710 cm²  Ground pressure  4.55 psi  0.32 kgf/cm² / 31.4 kPa  Track gauge  5'5''  1650 mm  Length of track on ground  7'9''  2360 mm    Coolant & Lubricant Capacity (refill)    Coolant  8.5 U.S. gal  32 ltr  Fuel tank  43.6 U.S. gal  165 ltr  Engine oil  3.3 U.S. gal  12.5 ltr  Hydraulic tank  12.4 U.S. gal  47 ltr  Final drive (each side)  0.9 U.S. gal  3.5 ltr    Operating Weight (APROXIMATE)    Tractor weight - Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.  Operating weight - Including power angle tilt dozer, ROPS canopy, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.  Operating weight  18,780 lb  8520 kg  Tractor weight  15,320 lb  6950 kg
	Charts Dimensions A 4'1'' 1255 mm B 9'0'' 2740 mm C 1'4'' 395 mm D 9'1'' 2773 mm E 2'11'' 890 mm F 1'5'' 440 mm G 7'9'' 2360 mm H 12'5'' 3780 mm I 13'9'' 4200 mm J 5'2'' 1575 mm K 6'8'' 2035 mm L 9'1'' 2770 mm M 2.1'' 53 mm N 5'5'' 1650 mm O 18'' 460 mm P 6'11'' 2110 mm Q 1'3" 372 mm R 8'3" 2515 mm Dozer Equipment Overall Length with Dozer Blade Capacity (SAE) Blade Width x Height Max. Lift Above Ground Max. Drop Below Ground Max.Tilt Adjustment 13'9" / 4200 mm 2.52 yd³ 1.93 m³ 9'0' x 3'3'' 2740 mm x 1000 mm 2'11'' 890 mm 1'5'' 440 mm 1'4'' 395 mm KomStat Power Angle Tilt Dozer. Hydraulic System Closed-center load sensing system(CLSS) designed for precise and responsive control, provides efficient simultaneous operation.   Hydrualic Control Unit: All spool control valves externally mounted beside the hydraulic tank. Gear-type hydraulic pump with capacity (discharge flow) of 24.6 U.S. gal/min 93 ltr/min at rated engine rpm.   Relief valve setting 2,990 psi 20.6 MPa/210 kg/cm² Hydraulic cylinders Double-acting, piston type Number of Cylinders: Bore: Blade Lift = 2 3.54'' 90 mm Blade Tilt = 1 3.54'' 90 mm Blade Angle = 2 3.35'' 85 mm Hydraulic oil capacity (refilling): - Power angle tilt dozer 12.4 U.S. gal 47.0 ltr Control Valves: - 3-spool control valve for Power Angle Tilt dozer: - Positions: - Blade lift Raise, hold, lower and float Blade tilt Right, hold and left Blade angle Right, hold and left Additional control valve required for ripper. - Positions: - Ripper lift Raise, hold, and lower